How to clean my Philips AquaTrio Pro after use

We advise you to flush the appliance after every use to prevent dirt from accumulating and bacteria from growing inside. If you do not flush the appliance after every use, this may lead to an unpleasant smell.

You can also clean each part separately for a thorough clean. The diagram below shows how each part of your Philips AquaTrio Pro can be cleaned.

For extra thorough cleaning, you can pull up the floater attached to the lid of the dirty water tank of the appliance. This enables you to rinse the bottom of the sieve and the floater properly.

Tip: You can also place the dirty water tank in the dishwasher.

The mopping brushes are cleaned when you flush your Philips AquaTrio Pro after use. If the brushes are still dirty after flushing, you can remove them from the nozzle and clean them with warm or cold running water. The mopping brushes are not washing machine-proof.

Cleaning instructions:

1. Lift the mopping brushes out of the mopping nozzle by their lime green grips.
2. Clean the mopping brushes by rinsing them with running water. If you want, you can use a liquid household cleaner or some dishwashing liquid.
3. Put the mopping brushes on the clean mopping brush cover to dry.
4. Place the brushes back. Make sure the mopping brushes are dry when they are placed into the appliance.

You can clean the mopping brush cover under the tap and with a damp cloth.

You can clean the inside of the mopping nozzle and the mopping nozzle lid with a damp cloth.