Trilogy Evo
Portable hospital-to-home ventilator
Trilogy Evo
Portable hospital-to-home ventilator
The next generation of the Philips Trilogy ventilator delivers proven performance in noninvasive (NIV) and invasive (IV) ventilation, and is designed to stay with your patients across changing care environments.
Ways to obtain the product
Single limb (Passive, Active PAP, Active Flow), Dual limb, 15 hours battery life*
For patients 2.5kg and above
Optional SpO2, EtCO2 monitoring
Features
For use in dynamic environments
With expanded cross-functionality, Trilogy Evo offers features to treat chronic and critical patients in a variety of settings, such as sub-acute or chronic care environments, a patient’s home or during their activities. It's designed specifically with durability in mind to protect it against damage during travel, such as during medical transport.
Long-lasting battery life
Ventilator-dependent patients are supported by internal and detachable batteries, now with 15-hour battery life. Compared to Trilogy 100's
six-hour battery, Trilogy Evo gives patients a new level of freedom and mobility. It's ready to be mounted onto a roll-stand or a wheelchair, with a mountable, easy-
to-use carry bag.
Meet your patients’ changing needs
Trilogy Evo provides noninvasive and invasive ventilator support with added sensitivity for a wide range of adult and pediatric patients.
Volume and pressure modes, AVAPS-AE, SpO2 and EtCO2 monitoring and alarms of every parameter allow for adaptable care. Flexibility of circuits allows it to be used in
a wide range of patients.
Specifications
- Ventilation modes
- A/C-PC
- Assist control (pressure control)
- A/C-VC
- Assist control (volume control)
- CPAP
- Continuous positive airway pressure
- PSV
- Pressure support ventilation
- S/T
- Spontaneous/timed ventilation
- SIMV-PC
- Synchronized intermittent mandatory ventilation (pressure control)
- SIMV-VC
- Synchronized intermittent mandatory ventilation (volume control)
- MPV-PC
- Mouthpiece ventilation (pressure control)
- MPV-VC
- Mouthpiece ventilation (volume control)
- Physical
- Weight
- 5.2 kg
- Size
- 16.5 cm D x 28.6 cm W x 24.5 cm H 6.48” D x 11.25” W x 9.65” H
- Screen dimensions
- 8”, 20.32 cm
- Oxygen
- Low flow
- 0 to 30 l/min; maximum 10 psi
- High pressure
- 280 to 600 kPa (41 to 87 psi)
- Measured and displayed patient parameters
- Tidal volume (Vti or Vte)
- 0 to 2000 ml
- Minute ventilation (MinVent)
- 0 to 30 l/min
- Leak
- 0 to 200 l/min
- Respiratory rate (RR)
- 0 to 90 BPM
- Peak inspiratory flow (PIF)
- 0 to 200 l/min
- Peak inspiratory pressure (PIP)
- 0 to 90 cmH2O
- Mean airway pressure
- 0 to 90 cmH2O
- Percentage spontaneous triggered breaths (%Spont Trig)
- 0 to 100%
- I:E ratio
- 9.9:1 to 1:9.9
- Dynamic compliance (Dyn C)
- 1 to 100 ml/cmH2O
- Dynamic resistance (Dyn R)
- 5 to 200 cmH2O/l/sec
- Dynamic plateau pressure (Dyn Pplat)
- 0 to 90 cmH2O
- Auto-PEEP
- 0 to 20 cmH2O
- FiO2 with FiO2 sensor
- 21% to 100%
- SpO2 with pulse oximeter accessory
- 0 to 100%
- Pulse rate with pulse oximeter accessory
- 18 to 321 beats per minute
- EtCO2 with CO2 accessory
- 0 to 150 mmHg
- Electrical
- AC input voltage
- 100V - 240V, 50/60 Hz, 1.7 - 0.6A
- DC input voltage
- 12/24V 6.5A
- Internal and detachable Li-on batteries
- 15 hours’ nominal total run time per method in IEC 80601-2-72 (7.5 hours each battery)
- Charge time for detachable and internal battery
- from 0% to 80%: 2.5 hours; from 0% to 100%: 3.5 hours
- Alarms
- Inspiratory Pressure
- PEEP+1 to 89 cmH2O
- Tidal Volume
- OFF, 10 - 2000 ml
- Minute Ventilation
- OFF, 0.2 - 30 L/min
- Respiratory Rate
- OFF, 1 - 90 BPM
- Circuit Disconnection
- OFF, 5 - 60 sec
- Apnea Interval
- 5 to 60 sec
- No trigger
- OFF; 0.5-15 min (ONLY in MPV)
- Controls
- AVAPS with passive circuit
- PSV, S/T, and A/C-PC modes only
- Tidal volume
- 35-2000 ml on Dual Limb & Active Flow circuits, 50-2000 ml on passive & active PAP circuits
- Breath rate
- 0 - 80 BPM
- PEEP
- 0 - 35 cmH20 for active circuits 3 - 25 cmH20 for passive circuits
- EPAP/CPAP
- 3 to 25 cmH20
- IPAP
- 3 to 60 cmH20
- Pressure support/pressure control
- 0 to 60 cmH20
- Inspiratory time
- 0.3 - 5.0s
- Rise time
- 0 to 6
- Triggering and cycling
- Off, AutoTrak, Sensitive, AutoTrak, and Flow Trigger
- Flow trigger sensitivity
- 0.5 - 9 l/min
- Flow cycle sensitivity
- 10% - 90% of peak flow
- Flow pattern
- Square, Ramp
- FiO2
- 21% - 100%
- Inspiratory time min/max
- 0.3 to 3.0 sec
- Backup ventilation
- ON-OFF
Documentation
Disclaimer
*Nominal run time per method in International Electrotechnical Commission (7.5 hour/battery). Detachable battery charge time 0% to 80% is 2.5 hours, internal battery charge time 0% to 100% is 3.5 hours.